Concrete mixer truck shifting skills

The shift is one of the most open concrete mixers do one thing, if the road is not good, it is more frequent, and the shifting operation is not good if the engine will cause very bad influence, directly affect the life of the engine below we should pay attention to in terms of a shift aspects.
concrete mixer truck prices
A: avoid looking down shift lever.
Especially in high-speed driving or driving city streets, the coach said, shifting down easy to make the direction of deviation, accident.
Two: bogey downshifts not empty oil boom.
When the lower gear, the gear synchronizer there, not with empty oil can also achieve lower gear clutch kick, but easy to make the mechanical wear and the early damage, whether or not it is recommended to synchronize the vehicle should use two foot clutch, kick empty oil plus approach downshifts.

Concrete mixer truck supplier
Three: Avoid prolonged use of low gear speed.
If a long time at low speed and low speed but high speed, with less mileage per unit of time, the relative increase in fuel consumption, it is recommended that after the vehicle starts, if not chilling the car, it should soon be raised to the appropriate level gear . In general, high-speed gear ratio to be fuel-efficient low gear.
Four: When avoid shifting the direction of deviation.
Many right-hand shift, the left steering wheel so hard to drop down towards the road center offset, causing the vehicle to cross the line or lane road, which is very dangerous for your safety, do not operate so.

China Concret mixer truck manufacturere
Five: bogey when a parked car did not change reverse gear.
When the car did not stop, still in forward gear, if you replace the reverse gear, the gear will be broken phenomenon.
Six: Avoid leapfrog upshifts.
In practice, owners should be progressively added to blocking, non-blocking add leapfrog, leapfrog upshifts could easily lead to vehicle power is not continuous, but downshifts can leapfrog, driving skill requirement for regular shift leapfrog downshifts.

Seven: bogey to move the shift lever back to neutral later shaking.
After the neutral gear, the shift lever is often unstable, rocking back and forth, it could easily lead to mechanical wear and tear.