Emergency clean-up of the two methods in the concrete mixer

When a fault occurs when the concrete mixer, if not promptly stirred tank cleaned out, a long time will be solidified, it will bring us great economic losses. Then you know how to clean up in case of emergency concrete mixer do? Here are concrete mixer emergency cleanup of two methods:

concrete batching plant,
concrete batching plant,

Emergency clean-up concrete mixer first method:
1, ready to drive emergency hose, turn off the faulty concrete mixer, remove the high-pressure hydraulic hose connector on the motor.
2, turn off the rescue vehicles, high-pressure tubing unload its hydraulic motor, and the corresponding failure of the car fitting the drive connected with the emergency hose.
3, launch rescue vehicle, which was allocated to the joystick discharge position, the car’s fault concrete being ejected.
4, emergency drive is complete, remove the hose will drive and restore the status quo ante two vehicles.

Emergency clean-up concrete mixer of the second method:
1, if the first method is difficult to implement, the following methods must be used immediately discharged concrete.
2, between the roller and the raceway into wedges to control the rotation of the mixing tube, be sure to pay attention to safety; turn off the engine, removed a loose hydraulic motor pressure tubing, the mixing tube can be rotated freely control the mixing tube rotation, so that repairs to the lower part of the hole, and then open the service hole, clean out the barrel of concrete. Then we must pay attention to safety, after completion of discharge of concrete, concrete mixer restore the status quo ante.

China Concrete mixer truck prices
Emergency clean-up within each of us is a concrete mixer Truck drivers should be in failure when the mixer, clean the losses to a minimum.