How do we maintain a concrete mixing plant?

The construction condition of the concrete mixing plant is poor, the probability of the abnormal situation is larger if you never maintain the plant, the outcome concrete would be unqualified, the concrete mixing plant parts will be damaged. Thus, we can see how important the daily maintenance of concrete mixing plant is! It can increase the production,and find operation problem in time, that means you can reduce a lot of lost and gain a lot of benefit. To maintain a concrete mixing plant properly? Here are some suggestions:

How do we maintain a concrete mixing plant?
How do we maintain a concrete mixing plant?

1, Make sure that the machine and the surrounding environment are clean.

2, Get rid of the product material residual inside the hopper in time, make the sensor back to zero normally.

3, Check the lubricating oil of every lubricating point, the oil mist detector of gas circuit system should maintain enough oil.

4, Check whether there is any overheating and abnormal noise on the motor and electric appliance. Check whether the instrument is normal, whether the signal system is in good condition.

5, Check and adjust the cylinder, solenoid valve and butterfly valve, make them open and closed up to the mustard.

6, Check the system frequently, if the system has the problem of ash, gas, oil and electricity leaking, you should handle this problem in a time.

7, The mixer and the hopper should be cleaned every four hours in order to avoid residual concrete consolidation and interfere the normal operation.

8, Each class should be put off the internal water of air compressor, air tank and filter, and eliminate the faults in the operation.

9, The maintenance of the butterfly valve, mixer, electromagnetic valve, air filter, oil mist device should be in accordance with the relevant specifications.

Other
Concrete mixing plant weighing systems including sensors, convergence is (perhaps convergence member), amplifiers, etc., are some crucial mixing station, the protection key is as follows:
(1) Lightning welding current is burned;
(2) do the dust, moisture and avoid all kinds of external damage;
(3) Deal with some convergence, making it sturdy, safe touch outstanding;
(4) To avoid overloading of abnormal material to damage.
More information about concrete mixing plant will be found on our website, please feel free to contact us or visit our website.

A qualified manufacturer provide customers professional maintenance suggestions to help them prolong service life of the product. Pay attention to the maintenance daily will bring you a lot of benefits.